# Reverse read quality with 806r\_Mod primer

**URL:** <https://forum.qiime2.org/t/reverse-read-quality-with-806r-mod-primer/33823>\
**Category:** User Support\
**Created:** [November 25, 2025, 10:19pm UTC](https://forum.qiime2.org/t/reverse-read-quality-with-806r-mod-primer/33823 "2025-11-25T22:19:59Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![hdeel](https://forum.qiime2.org/letter_avatar_proxy/v4/letter/h/3da27b/32.png) [@hdeel](https://forum.qiime2.org/u/hdeel)\
**Post date:** [November 25, 2025, 10:19pm UTC](https://forum.qiime2.org/t/reverse-read-quality-with-806r-mod-primer/33823/1 "2025-11-25T22:19:59Z")

</div>

# Hi QIIME2 folks! Happy holiday week!

I am troubleshooting some interesting-looking reverse reads. Our lab tried out some new primers (515f\_Mod, 806r\_Mod), which are modified from the EMP primers to include more degeneracy to capture more diversity (see [Hu et al. 2024](https://www.researchgate.net/publication/379024050_Global_abundance_patterns_diversity_and_ecology_of_Patescibacteria_in_wastewater_treatment_plants)). These are in-house sequenced 2x150 Illumina Miseq reads. Our forward reads look relatively normal, with a consistent drop in quality, but the quality of the reverse reads goes down, back up, and down again, which is quite unusual. Since the forward read quality looks normal I don’t think it’s a bioinformatics issue, and the reads per sample for forward and reverse reads look good (see attached demux.qzv).

[demux.qzv](https://forum.qiime2.org/uploads/short-url/6ZvqkSuEjnOSBxkw56Eg2PqtIld.qzv) (332.6 KB)

A colleague mentioned this could just be a sequencer issue, which to me seems most likely. Has anyone used these primers before, and if so, did you have reverse read quality like this? Or has anyone seen reverse quality like this (with forward reads looking normal) and found out it was a sequencer issue? We’ve contacted Illumina to see what they say, but I’m curious if others have seen this (and I didn’t see a previous post on this topic, forgive me if there has already been one).

Any insight is helpful!

Heather Deel

---

<div class="post-metadata">

**Author:** ![gregcaporaso](https://forum.qiime2.org/user_avatar/forum.qiime2.org/gregcaporaso/32/17769_2.png) [@gregcaporaso](https://forum.qiime2.org/u/gregcaporaso)\
**Post date:** [December 4, 2025, 3:09pm UTC](https://forum.qiime2.org/t/reverse-read-quality-with-806r-mod-primer/33823/3 "2025-12-04T15:09:12Z")

</div>

Hey @hdeel,  
Great to hear from you, it's been a while!

I haven't run into this myself. Have you heard from Illumina? It does sound like a sequencing rather than bioinformatics issue. If you've learned anything about it, it would be great to have you share that here in case others run into similar issues in the future.

---

<div class="post-metadata">

**Author:** ![hdeel](https://forum.qiime2.org/letter_avatar_proxy/v4/letter/h/3da27b/32.png) [@hdeel](https://forum.qiime2.org/u/hdeel)\
**Post date:** [December 4, 2025, 7:55pm UTC](https://forum.qiime2.org/t/reverse-read-quality-with-806r-mod-primer/33823/4 "2025-12-04T19:55:04Z")

</div>

It has, hope you’ve been well, Greg!

We did hear back from Illumina, they replaced the kit for us and I just got the re-sequenced data this morning. It was in fact a sequencing issue 🙂 I’ve never seen one that produced reverse reads like this before!

I agree, good for others to see as well.

Heather

---

<div class="post-metadata">

**Author:** ![gregcaporaso](https://forum.qiime2.org/user_avatar/forum.qiime2.org/gregcaporaso/32/17769_2.png) [@gregcaporaso](https://forum.qiime2.org/u/gregcaporaso)\
**Post date:** [December 4, 2025, 8:34pm UTC](https://forum.qiime2.org/t/reverse-read-quality-with-806r-mod-primer/33823/5 "2025-12-04T20:34:10Z")

</div>

Thanks for the update @hdeel - glad you all got it sorted out!

---

<div class="post-metadata">

**Author:** ![system](https://forum-qiime2-org.s3.dualstack.us-west-2.amazonaws.com/original/3X/2/1/21af5fe23cb6f4579467c66a9ed94e55274ca7bd.svg) [@system](https://forum.qiime2.org/u/system)\
**Post date:** [January 5, 2026, 2:34am UTC](https://forum.qiime2.org/t/reverse-read-quality-with-806r-mod-primer/33823/6 "2026-01-05T02:34:14Z")

</div>

This topic was automatically closed 31 days after the last reply. New replies are no longer allowed.
